ISB GEEW 25 ES plain bearings

Availability:In Stock; Weight:8.65 KGS; Reference Speed Rating (r/min):1000; d:120mm; Limiting Speed Rating (r/min):1400; Dynamic Load Rating (kN):190; Fatigue Load Rating (kN):17.6; Minimum Load Factor:2; Cage Type:Steel; B:81mm;

d:28mm; Cage Type:Steel; SKU:60/28-nsk; Oil Limiting Speed (r/min):16000; Clearance:Standard; Static Load Rating (kN):7.4; Weight:0.10 KGS; Grease Limiting Speed (r/min):14000; Dynamic Load Rating (kN):12.5; D:52mm;

d:90mm; Weight:0.02 KGS; Seals or Shields:Open Type; Cage Type:Steel; D:160mm; B:52.4mm; SKU:23218cc/c4w33-qbl; Availability:In Stock; Clearance:C4;

expansion type:Non-Expansion Bearin; housing material:Cast Iron; compatible frame number:NS400; lubrication type:Lubrication Fitting; manufacturer catalog number:131171; seal type:Contact/Lip; rod hole diameter:7/8 in; series:209; dynamic load capacity:7891 lb; slot width:0.3130 in;

seal type:Contact; bore type:Round; radial dynamic load capacity:975 kgf; D:40 mm; inner ring width:22 mm; radial static load capacity:490 kgf; manufacturer product page:Click here; locking device:Set Screw Collar; d:12 mm; outer ring width:12 mm;

standards met:83-7-7-3, ASTM B505,; maximum p value:4000 psi; sleeve bearing type:Plain Sleeve; overall length:6 in; weight:5.562 lbs; operating temperature range:Max 500 ºF; bearing material:Cast Bronze C93200 &; D:4 in; maximum pv value:75000; material specification:SAE 660 (C932&#;

lock nut number:AN 17; material / coating:Steel; compatible bearing number:22317 CCK/W33; series:SNW; manufacturer upc number:087796146617; d:3.0000 in; taper:1:12; housing size:SAF 617;FSAF 61; lock washer number:W 17;

race material:Carbon Steel - corro; ball width:.4370 in; shank thread length:.7190 in; axial static load capacity:750 lb; ball material:Alloy Steel - heat t; length to ball center:1.3750 in; rod end type:Female Threaded; operating temperature range:Max 350°; misalignment angle:7 °; lubricati

B:24 mm; Da max.:55 mm; Mass bearing:0.34 kg; d2 ≈:32.8 mm; Calculation factor Y0:2.5; Calculation factor Y2:3.5; D:62 mm; Permissible angular misalignment α:1.5 °; D2 ≈:52.7 mm; ra max.:1.1 mm;

static load capacity:12500 lbf; bearing material:Case Carburized Stee; finish/coating:Uncoated; fillet radius:0.1900 in; cone width:0.9550 in; operating temperature range:-40 to 250 ºF; dynamic load capacity:13000 lbf; d:1.1250 in; manufacturer upc number:4547359533224; inner ring width:0.9550

radial static load capacity:30800 lb; B:33 mm; fillet radius:2 mm; internal clearance:C0; ball screw application:Not for Ball Screws; contact angle:15 °; D:200 mm; series:2MM9100WI; d:130 mm; radial dynamic load capacity:32200 lb;

Reference Speed Rating (r/min):1700; D:340mm; Dynamic Load Rating (kN):1340; Cage Type:Steel; Static Load Rating (kN):1970; Limiting Speed Rating (r/min):1400; Seals or Shields:Open Type; Weight:28.70 KGS; SKU:23044ejw33c4-timken; d:220mm;

cage material:Steel; series:62; internal clearance:C0; static load capacity:19 kN; d:40 mm; fillet radius:1 mm; closure type:Double Shielded; snap ring included:With Snap Ring; dynamic load capacity:32.5 kN; finish/coating:Uncoated;