ISO NP28/1400 cylindrical roller bearings

Pa:42.9 kN; Cap bolt recommended tightening torque:203.4 N·m; Da:299.999 mm; P180°:92.5 kN; P150°:77 kN; Max. speed for Taconite seal:625 r/min; Stabilizing ring:SR-0-28; Cap bolt, SAE grade:5; Initial grease fill:878.85 g; Mass pillow block:134 kg;

B2:60 mm; Reference speed:560 r/min; Da max.:632 mm; Calculation factor e:0.18; Limiting speed:1000 r/min; d3:560 mm; Calculation factor Y1:3.8; B:128 mm; K:9 mm; b:16.7 mm;

Grease Speed Rating n1:3200 rpm; B:41.30 mm; D:130.0000 mm; Basic Dynamic Radial Load Rating C:108000 N; d:75.000 mm; Fillet Radius ra:1.50 mm; Oil Speed Rating n2:4300 rpm; Basic Static Radial Load Rating Co:137000 N; Sealed Speed Rating n3:3200 rpm; Accessories:No Shield, no Seal,;

Oil Speed Rating Open/Shielded n2:4000 rpm; Grease Speed Rating Open/Shielded n1:3400 rpm; d:80.000 mm; Fillet Radius ra:2.50 mm; Basic Dynamic Radial Load Rating C:163000 N; D:200.0000 mm; Basic Static Radial Load Rating Co:125000 N; Accessories:One Seal; Sealed Speed Rating n3:2300 rpm; B:48.00 mm

Basic Dynamic Radial Load Rating C:7800 N; Basic Static Radial Load Rating Co:3250 N; B:11.00 mm; Oil Speed Rating Open/Shielded n2:24000 rpm; Grease Speed Rating n1:19000 rpm; Fillet Radius ra:0.64 mm; Sealed Speed Rating n3:13000 rpm; Oil Speed Rating n2:24000 rpm; Grease Speed Rating Open/Shielde

P150°:2700 kN; H1:380 mm; Lock washer:MS 3092-88; Cap bolt, rec. tightening torque:600 N·m; N4 max.:35 mm; ATK:560 mm; N1:48 mm; A:430 mm; J6:1020 mm; Appropriate attachment bolt, rec. tightening torque:3640 N·m;

Recommended diameter for attachment bolts, inch G:0.375 in; d:25 mm; Bearing:YELAG 205; A3:3.2 mm; Mass bearing unit:0.37 kg; Da:74.6 mm; Basic static load rating C0:7.8 kN; Housing:FYK 505; A1:15 mm; Thread grub screw G2:M6x0.75;

Width C:14 mm; Grease or Oil Speed Rating n1:9000 rpm; Basic Dynamic Radial Load Rating:12700 N; B:40.00 mm; d:20.000 mm; Basic Static Radial Load Rating Co:3400 N; Fillet Radius ra:1.00 mm; D:47.0000 mm;

B:46.00 mm; d:40.000 mm; Grease Speed Rating n1:14000 rpm; Oil Speed Rating n2:20000 rpm; Basic Static Radial Load Rating Co:67000 N; Fillet Radius ra:1.50 mm; Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:79300 N; D:90.0000 mm;

Accessories:Two Seals; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:3800 rpm; Sealed Speed Rating n3:2800 rpm; D:140.0000 mm; Grease Speed Rating n1:2800 rpm; Basic Static Radial Load Rating Co:160000 N; Basic Dynamic Radial Load Rating C:128000 N; B:44.40 mm; d:80.000 mm;

Lw:9.8 mm; r1 max.:0.4 mm; Mass needle roller:0.136 g; r1,2 min.:0.1 mm; Dw:1.5 mm; r2 max.:0.6 mm;

Mass lock nut:0.091 kg; h:2 mm; B:11.5 mm; d3:52 mm; b:5 mm; Recommended grub screw tightening torque:4.5 N·m; d1:41.5 mm; Axial static load carrying capacity:50 kN; Associated spanner:HN 7; Grub (set) screw size:M5;

D:22.0000 mm; B:12.00 mm; Basic Dynamic Radial Load Rating C:5070 N; d:10.000 mm; Fillet Radius ra:0.30 mm; Fillet Radius rb:0.10 mm; Oil Speed Rating n2:32000 rpm; Basic Static Radial Load Rating Co:3100 N; Grease Speed Rating n1:26000 rpm;

Fillet Radius ra:3.00 mm; Oil Speed Rating n2:2900 rpm; d:105.000 mm; Grease Speed Rating n1:2400 rpm; Basic Dynamic Radial Load Rating C:286000 N; Fillet Radius rb:1.00 mm; B:65.00 mm; D:290.0000 mm; Basic Static Radial Load Rating Co:355000 N;

Hydraulic nut:HMV 72 E; d:340 mm; Mass withdrawal sleeve:25.5 kg; B2:288 mm; d1:320 mm; G1:26 mm; B1:269 mm; A:9 mm; G:Tr 360x5; Nut for removal:HM 3172;